Repairing my Arnova 10B sound output

Suddenly my Arnova 10b G2 Soundoutput stops working.
So I took a screwdriver 

Remove the 4 screws from the edges.

You will see the main board

Remove the metallic shield

Resolder the pins from the sound output jack
And it should work again

Raspberry Basic Configs Archlinux

Static ip on Network (Archlinux)

# pacman -S netcfg
# nano /etc/network.d/ethernet

CONNECTION='ethernet'
DESCRIPTION='Static ip config'
INTERFACE='eth0'
IP='static'
ADDR='10.168.10.30'
GATEWAY='10.168.10.1'
DNS=('10.168.10.1')


-----------------------------------------------------------------------
#  nano /etc/conf.d/netcfg


# Enable these netcfg profiles at boot time.
#   - prefix an entry with a '@' to background its startup
#   - set to 'last' to restore the profiles running at the last shutdown
#   - set to 'menu' to present a menu (requires the dialog package)
# Network profiles are found in /etc/network.d
NETWORKS=(ethernet)         Change the name to the profil-file you created

-----------------------------------------------------------------------



#  systemctl enable netcfg.service        Start the service
-----------------------------------------------------------------------

Set Timezone (Archlinux)

Copy the file with your country to localtime and reboot.

You will find your Timezone under /usr/share/zoneinfo/

Example for my Timzone Luxemburg.

# ln -s /usr/share/zoneinfo/Europe/Luxembourg /etc/localtime

# reboot

-----------------------------------------------------------------------

Init the analog soundcard (Archlinux)

# modprob snd-bcm2835


To make it permanent create this file:

nano /etc/modules-load.d/soundload.conf

Write this lines:

# Load Sound at boot
snd-bcm2835

and save.

-----------------------------------------------------------------------

For Mplayer install

pacman -S gsm ffmpeg libvpx libx264 openjpeg