Motion tracking test film "Taser 3000"

D.I.Y. Motion Control Camera Dolly

A few Gear Wheels

An old 12V Stepper Motor

The Driver Modul

Stepper motor mounted on my Dolly

Full View

Now the microcontroller

Ween huet d'Bomm geluecht

Enn klengen Projet deen ech mat Gimp an Sony Vegas pro 8 gemmet hun

Mike, Alex and myself. First steps as camera operators

My diy camera equipment.

camera Canon 650d

7 Inch TFT screen

self build 12V 3Ah akku box

Mouse Trap 2012

My first prototype of my mousetrap

 

And it worked

The new model B

 

The Infrared barrier

 

Electronic with fine tunning ;)

 

Trap in position

 

And again got it :)  Watch the movie

 

The movie

DOF Adapter

I build this adapter 4 years ago.

The 35 mm adapter consists of a junction box painted black. On a black PVC plate a Nikon focusing screen.

 

The Pancake motor from an old Pager

 

Pvc panel with Nikon "Type D" focusing screen.
Ower the four threaded rods I can set the distance between the Ground Glass and the optics.
And the pancake motor for vibrating.

Image on the focusing screen

I used two aluminium tubes with 12mm diameter and +- 50cm length
I fixed the tube clamps on a PVC board but you could use wood too.
The hole on the left is for fixing the camera

The Matte Box

The Set for my Test movie

The Test Movie

Window Shutter

This time no use of electronic, but a pure wood project.
My sons Room is at the SW side of the house and so in the evening he could get no sleep and in the morning is awake at 6:00 (on Saturday an Sunday ... arg.)

I checked-up the prices for window shutters +- 300 Euro without the wood treatment and color (shock) so I decided to do it on my own.

Phase 1, get the materials:

Wood :)
Fixations
Screws and Glue
Wood treatment and color


Let's go,

Glue the Wood Parts and press them together.

 Clean up the glue before its hard ;)

Take measurements and cut it

 

First part of wood pretreatment

 

The finished Z construction

Block the window shutter to see if everything fits

 

 

Not so bad?

Let's colorize

 

 

Finished

3d TV on a China Tablet

 

I used this 4mm hard foam plates

Build a box and do not forget a space for your nose ;)

I used 2 Lenses 52mm +8 Dioptrie used in photography

A piece in the middle to separate left and right

I attached Ski Goggles with duct tape on the box construction

 

Use a 3d movie in split screen mode on the 7 inch china tablet

Slide it in and enjoy 3D ;)